|
Support for Visualizer Capture 3.0.31 added
BlueLite X1 V1.2 supports Capture 3.0.31. To download a demo version of
Capture go to
http://www.capturesweden.com
To try the power of Capture combined with BlueLite X1 do the following. For
best results it is recommended to install Capture 3.0.31 and BlueLite X1 V1.2 on two separate computers connected over an Eithernet connection. If you have a fairly new computer and a good Graphic Card (32MB minimum, but 64BM+ recommended), then you can run both programs on one single computer.
- Download and install BlueLite X1 V1.2 (or newer)
- Download and install Capture 3.0.31 (or newer)
- Launch BlueLite X1
- Load the show file "Awards.x1"
(default location is C:\Program
Files\BlueLite X1\Samples)
- Select "Tools->Capture 3.0 (CITP) Interface" from the menu to enable Capture support
- Launch Capture
- Load the show file "Awards.cpf"
(default location is C:\Program
Files\Capture 3.0\Projects)
- Click on the "Universes" Tab. Right Click on Universe "A", select "Provider->Setup" and select "BlueLite Out01"
- Do the same for Universe "B" and "C" and assign it to "BlueLite Out02" and "BlueLite Out03"
- In BlueLite: Open the Event List Window
("Windows->Event List" from
the menu)
- Press Play to run the show
Besides Capture 3.0 simulating the entire output of the BlueLite X1's 16
Universes (4 per Hardware), the following additional features are supported.
When opening the Cue Editor(Select"Windows->Cue List", then double click on any cue number)
any device selection will be reflected in Capture 3.0 (Allow 15 seconds to
synch after Capture is first started)
Any Fixture modification (position, shutter, color, …) in Capture will be
reflected in the BlueLite X1 show as long as the Cue Editor is open and
the currently edited fixture is contained in the opened cue.
This is especially useful if
you select multiple fixtures in Capture, then
select"Edit->Select/Focus/Patch" from the menu and focus
them with one click. All positions will be automatically
updated in the Cue Editor in the BlueLite X1. (Modifying
the position in the Cue Editor in BlueLite will of
course also be reflected in Capture.)
|
|
